Aigean MAP-7 Dual Band Access Point
Quickly and easily connect to your existing network to add or expand wireless coverage. When paired with an Aigean Networks Wi-Fi Client or Router, you can manage any connected access points directly through their interfaces.
- Powerful 2.4 GHz and 5 GHz (802.11abgn)
Installation is fast and easy. No CD or software installation is required. Simply mount, plug in and power on. The interface is web-based so anything with a browser will work!
Dual Band Technology
Significantly increase connection speeds by utilizing 5 GHz with modern supported devices. Older device can take advantage of the 2.4 GHz channels.
Compatable with any Aigean Networks Wi-Fi client device. When on the same network, control the MAP directly through the Wi-Fi interface in your browser.
- 2.4 GHz 802.11b/g/n: 1000 mW output, 3x3 MIMO
Atheros MIPS 74Kc, 550MHz
128MB SDRAM, 16MB Flash
2 x 10/100/1000 BASE-TX (Cat 5, RJ-45) Gigabit Ethernet
2.4 GHz Radio
802.11b/g/n Wi-Fi with MIMO (3x3)
≤30 dBm (1W)
minimum -96 dBm
3x Integrated 5 dBi Omni
5 GHz Radio
802.11a/n Wi-Fi with MIMO (2x2)
≤22 dBm (160 mW)
minimum -96 dBm
2x Integrated 4 dBi Omni
Physical / Electrical / Environmental
None - Internal Antennas
11.9" x 9.3" x 1.5" (300mm x 266mm x 36.7mm)
0.64lbs, 0.95lbs with Mounting Kits (0.29kg, 0.43kg)
Powder coated die cast aluminum enclosure with rubber seal, ABS plastic mounting plate, and stainless steel hardware
Passive Power over Ethernet (48V), 802.3af Supported
14°F to 158°F (-10°C to 70°C)
5 to 80% Noncondensing
Shock and Vibration