Aigean MAP-2 Single Band Access Point
Quickly and easily connect to your existing network to add or expand wireless coverage. When paired with an Aigean Networks Wi-Fi Client or Router, you can manage any connected access points directly through their interfaces.
Installation is fast and easy. No CD or software installation is required. Simply mount, plug in and power on. The interface is web-based so anything with a browser will work!
Instead of sending one data stream, multiple data streams are sent in parallel, when possible, improving the data rate with supported devices.
Compatable with any Aigean Networks Wi-Fi client device. When on the same network, control the MAP directly through the Wi-Fi interface in your browser.
Atheros MIPS 74Kc, 550MHz
128MB SDRAM, 8MB Flash
1 x 10/100 BASE-TX (Cat 5, RJ-45) Ethernet
802.11b/g/n Wi-Fi with MIMO (2x2)
≤20 dBm (100 mW)
minimum -96 dBm
2x Integrated 3 dBi Omni
None - Internal Antennas
11.9" x 9.3" x 1.5" (300mm x 266mm x 36.7mm)
0.64lbs, 0.95lbs with Mounting Kits (0.29kg, 0.43kg)
Plastic saucer-style enclosure
Passive Power over Ethernet (12-24V)
14°F to 158°F (-10°C to 70°C)
5 to 80% Noncondensing
Shock and Vibration
IP60 (NEMA 1)