The new display design allows you to carry out all operations simply by using the unified keyboard layout. The keyboard is solid and responsive, which allows for precise operation. The keys are also backlit, making it easy to operate in low-light settings on the bridge.
The compact design of the JLR-7500/JLR-7800 incorporates a new intuitive interface, providing enhanced ergonomics and user friendliness. The logic of the controls and excellent on-screen menus will greatly shorten most users’ learning period.
Key In Data
With the new (D)GPS navigator, entering data is just as simple as creating a (SMS) text message on your phone. The consistency in the keyboard layout allows entering waypoint data fast and in a natural way.
Satellite Integrity Check
The newly developed sensors include RAIM, which is to access the integrity of GPS signals. If multiple satellite signals are picked up, this system will check if the position fix is consistent with the computed position, assuring higher reliability than conventional methods.
The (D)GPS navigator integrates four configurable NMEA ports. This advanced feature will allow you to e.g. have one port configured with the latest NMEA standard, while another port is capable of running a previous version. In this way you can connect older equipment onboard. It also has one in and two contact outputs and LAN, which facilitates route data transfer and/or interswitching.
The display is very compact and can be mounted virtually anywhere, allowing for a flexible installation approach in confined spaces. The base of the sensor is designed for an easy installation, either on a pole or on an extension mast. The base also includes a slot allowing for easy cable management, significantly reducing installation time.
Up to 10,000 waypoints can be stored in the internal memory. All waypoints can be named and renamed up to sixteen characters. You can make 100 routes with 512 waypoints per route, which can be entered randomly, and there’s room for 2000 points for the ship’s track and up to 1000 for events and marks.
Via a LAN connection, you can easily connect two displays. The second display is fully operable and auto synchronizes with the main display, which is directly connected to (D)GPS sensor, allowing e.g. acknowledging alarm or adjusting waypoints/routes at a secondary location on the ship You can also set for a dual installation, having two (D)GPS sensors connected to two different displays to simply switch when necessary, assuring you always on.
Display 5.7-inch, white LED backlight, 320 by 240 pixels
Dimmer 4 stages (bright, middle, dark, off )
Power supply 10.8V to 31.2V DC <10 W
Serial data in/out output: 4 ch (IEC61162-1), input: 1 ch
Contact signal in/out output: 2 ch, input 1 ch
LAN built-in 10/100 Mpbs
Data backup display: flash ROM, sensor: SRAM with battery
Waypoint 10,000 points, event memory 1000 points, WPT name: 16 characters
Waypoint input LAT/LON, bearing/range, event, TD
WPT/route data transfer via LAN and RS-232C
Track/route 2000 points, 100 routes with 512 WPT per route
Plot scale 0.2, 0.5, 1.2, 5, 10, 20, 50, 100, 200, 300 NM
Plot interval 1 up to 60 min (1 sec) or 0.01 to 99.99 NM (0.01 NM)
Navigation calculation select Great Circle and Rhumb line for each leg (total distance up to 99,999 nm)
Screen mode LAT/LON, CDI (highway), trackplot, GPS sat. info, enter WPT/route planning, WPT info
Alarms arrival, anchor, boundary, XTD, no position fi x, speed, trip, 1) temperature, 1) depth, HDOP
Adjust magnetic variation auto or manual
Geodetic system 46 systems
Units NM/kn, km/kPh, mi/miPh, m, ft, fm, °C or °F
LORAN C/A convert convert LAT/LON to TD of LORAN C/A