Lowrance 000-11749-001 Outboard Pilot Cable steer Pack

Outboard Pilot Cable-Steer Pack

The autopilot pack for Lowrance High Definition System (HDS) displays, provides automatic steering for cable-steer outboard motors. An extra pair of hands when you need it, the Outboard Pilot, featuring Lowrance SmartSteer™ control from your HDS Gen2 or Gen3, will steer to a heading, waypoint or route.

Everything you need in one box to fit an autopilot to your cable-steer outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen3, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area.

The Lowrance Outboard Pilot is recommended for single and dual outboard set-ups, on boats that are 30 feet and less, in length.

What's in the Box

NAC-1 Autopilot Computer  
The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor

Helm-1 -1 Cable-steer helm drive unit  
This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1.

Point-1AP Heading and GPS Sensor 
Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed

Auto/Standby Button 
Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.

NEMA 2000 Starter Kit 
Contains: 4 Way NMEA2000 Block, Terminator Kit, NMEA2000 Power Cable, one each of 2,6 and 15 ft NMEA2000 cables.