Raymarine T70250 EV-100 Power Pilot
Evolution Autopilots can be purchased as a system pack with a drive unit, a system pack without a drive unit or as individual components.
EV-100 Power
The EV-100 Power autopilot system consists of the revolutionary EV-sensor core, the fully-sealed and compact ACU-100, a P70R control interface, and Raymarine’s new highly efficient 0.5 litre hydraulic pump.
Perfect for vessels with single outboard engines and hydraulic steering, install the entire system above or below decks as required, and benefit from world-leading autopilot performance at a truly head-turning price.
Raymarine EV-100 Wheel Pilot
EV1 Sensor Core
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
At the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
ACU-100
With the ACU-100 Raymarine brings the exceptional performance of Evolution Autopilots to sport boats, runabouts and smaller cruising yachts.
Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor.
As a true world-first innovation, the ACU-100 is fully sealed so may be mounted above decks on boats where space is limited.
0.5ltr Hydraulic Pump(12V)
The 0.5ltr Hydraulic Pump is intended to operate the boat’s steering mechanism as part of a Raymarine autopilot system. It is primarily designed for use on boats with an existing hydraulic steering system. Alternatively, you can use this pump on a boat with mechanical steering in conjunction with a secondary steering ram.
The hydraulic pump contains a precision gear pump and a check
valve driven by a servo motor.
Part Number | T70250 |
---|---|
Features | EV1 Sensor Core
ACU-100With the ACU-100 Raymarine brings the exceptional performance of Evolution Autopilots to sport boats, runabouts and smaller cruising yachts. Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor. As a true world-first innovation, the ACU-100 is fully sealed so may be mounted above decks on boats where space is limited. 0.5ltr Hydraulic Pump(12V)
|
Specs | EV1 Sensor CoreDimensionsDiameter: 140 mm (5.5 in) | Depth (including mounting enclosure): 35 mm (1.4 in) | Depth (including wall bracket): 95 mm (3.8 in) Nominal supply voltage12 V (powered by SeaTalkng system) Operating voltage range10.8 V to 15.6 V dc Power consumption (taken from SeaTalkng system)30 mA SeaTalkng LEN (Load Equivalency Number)1 Sensors3-axis digital accelerometer | 3-axis digital compass | 3-axis gyro digital angular rate sensor Data connectionsSeaTalkng | NMEA 2000 DeviceNet (EV-2 only) Installation environmentalOperating temperature: -20ºC to +55ºC (-4ºF to +131ºF) Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF) Relative humidity: max 93% Waterproof ratingIPX 6 Weight0.29 kg (0.64 lbs) EMC complianceEurope: 2004/108/EC | Australia and New Zealand 0.5ltr Hydraulic Pump(12V)Part NumberE12139 Vessel DisplacementDoes not apply here. The drive unit is matched to the ram capacity of the steering system Ram Capacity50cc-150cc Maximum Stall Pressure at 12V50bar (750psi) Peak Flow Rate No Load1000cc/min (67in3/min) ACU UsedACU-100 |
Brand | Raymarine |
Package Includes | - EV-1 Sensor Core - ACU-100 - Type 0.5 Hydraulic Pump 12V - Evolution Cable Kit |