Marine electronics, service and installation since 1976
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier's channel levels from the driver's seat.
12 Hz - 22 kHz (+0, -1dB)
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
>150 / 50 Hz
>75 / 50 Hz
<1% @ 2 Ω per Ch.
Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
4 AWG wire
80 A (AFS, AGU or MaxiFuse™)
Low-Pass or High-Pass
50 Hz - 500 Hz
2 or 4 or All Channels
Yes (2/4/6/8 ch.)
75 W RMS x 8
100 W RMS x 8
200 W RMS x 4
* Required Fields
You can continue with your social account: