Marine electronics, service and installation since 1976
The NBPS200-2R bilge pump switch and bilge pump controller measures water level using sound waves. It detects bilge pump system events using its Multi-Assessment technology and communicates event information to Nevata Insight™ through the integrated and secured Wireless Sync module.
Automatic Marine Bilge Pump Switch and Bilge Pump Controller for a single bilge pump, which manages the bilge pump activation and deactivation based on:
The NBPS200-2R bilge pump switch and bilge pump controller measures water level using sound waves and detects bilge pump system events using its Multi-Assessment technology and communicates event information to Nevata Insight™ through the integrated and secured Wireless Sync module.
Nevata eliminates the bilge pump float switch and intelligently measures the water level using sound waves designed to provide a steady reading even with the rocking motion of the vessel. Nevata controls the attached bilge pump using learned pump characteristics and integrated intelligence from the ceiling of the bilge compartment to avoid sitting in grimy water for high-reliability.
Nevata is watertight and UL marine certified, meaning it’s been evaluated and tested for use in the marine environment under the harshest of operating conditions. This sophisticated and simple to use intelligent marine bilge pump switch and controller offers a piece of mind that is unparalleled.
Nevata operates with many major marine bilge pumps including Rule Industries, Attwood, Johnson Pump, Shurflo, West Marine, and Whale Pumps, but compatibility is determined by the bilge pump’s electrical specifications being within the range of the Nevata Technical Specifications.
12V, 24V, and 32V DC systems. Absolute min/max 10V-37V
Does not include bilge pump: 20mA (12V), 24mW
With Bilge Pump: See bilge pump electrical specifications
Bilge Pump Max Current/Power: 16A/300W
12V DC input to Nevata, 12V DC output to a DC Bilge Pump and 16A max output to a DC Bilge Pump
24V DC input to Nevata, 24V DC output to a DC Bilge Pump and 13A max output to a DC Bilge Pump
32V DC input to Nevata, 32V DC output to a DC Bilge Pump and 9A max output to a DC Bilge Pump
1 to 30 inches, .1inch, +/-.1inch, (From bottom of sensor)
-20 to 55C
40KHz to 45KHz
Up to 100ft max (actual results will vary)
* Required Fields
You can continue with your social account: