Raymarine ITC-5 Transducer Converter
The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.
iTC-5 Instrument Transducer Converter Features
The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.
Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.
Extended STng systems can support multiple iTC-5 units.
SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.
Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers
Part Number | E70010 |
---|---|
Specs | Product Number E70010 Nominal supply voltage 12 V dc Operating voltage range 9 - 16 V dc Current <150 mA peak operating current Power consumption Typical: 1.5 W Environmental Installation environment: Operating temperature = 5ºf to +131ºF (-15ºC to +55ºC) Storage temperature = -13ºF to +158ºF (-25ºC to +70ºC) Relative humidity: max 95% Splash proof to IPX2 Data connections SeaTalkng backbone 1 x SeaTalkng spur 5 x transducer connections with spade terminals Conformance Europe: 2004/108/EC Australia and New Zealand: C-Tick Compliance Level 2 |
Brand | Raymarine |
Package Includes | - iTC-5 - Documentation Pack - Fixing screws x 2 - 400mm SeaTalkng spur |